Charge Controller for Batteries
ENS series with PWM charging technology, increase the battery lifetime and improve the solar system performance
charge controller for batteries
1.Product introduction of the charge controller for batteries
ENS series with modern design and LCD display make it outstanding from the PWM solar charge controller.
2.Product parameter (specification) of charge controller for batteries
12/24V auto. detection
Max. charging current
AGM; GEL; WET
Gift box; 18pcs/14.7Kgs/CTN; 41.5*40*27cm
1 * 12/24V 30A Controller;
1 * User Manual;
3.Product feature and application of charge controller for batteries
ENS12/24-30D can work in 720W system the Max.
Solar panels are made of semiconductor photovoltaic effect and can directly convert solar radiation into electrical energy devices. The semiconductor material with strong photovoltaic effect will change the distribution and concentration of the internal electrons and holes in the conductive material after absorbing certain energy photon. When the light is on the semiconductor P/N junction, the optical voltage is generated at both ends. When the external circuit is connected, the current will flow through the external circuit to produce a certain output power. In this process, the photovoltaic cell itself does not have any chemical reactions, nor does it rotate wear, so the process of using solar cells has no noise and no environmental pollution, which is incomparable to other ways of generating electricity.