high voltage controller
1.Product introduction of the high voltage controller
MPPT2480D works with MPPT charge mode being used for charging the battery through solar panel power in a ;high efficiency and science way.
2.Product parameter (specification) of high voltage controller
Working voltage of the battery
Maxium. Module/charge current
Own consumption, active
Own consumption, standby
Own consumption with load connected
PV over voltage protection
Constant voltage charge
Low disconnect voltage
Low reconect voltage
RS232 communication interface
Yellow box: 6pcs/CTN, 42*24.5*36.5cm
1*80A Solar Charge Controller
3.Product feature and application of high voltage controller
MPPT2480D could only work in 24V system, the biggest power of the system is 1920w.
The output power of photovoltaic cells is affected by many factors, especially depending on the amount of solar radiation that comes to its surface. Due to the influence of various factors such as latitude, longitude, time, air state and weather conditions, the amount of radiation that can be accepted in a certain place is changing all the time, and the accidental shadow shielding will also reduce the output power. Therefore, the maximum output power point Pm, short circuit current Isc and open circuit voltage Voc are constantly changing with the radiation intensity and the ambient temperature, so the photovoltaic power generation system is constantly adjusted to make the photovoltaic cells work at the maximum power point, but this makes the output current and voltage of the photovoltaic cells constantly changing. That is, the output power is constantly changing.